Led Indicators And Connectors - Draytek VigorAP 910C User Manual

1 . 2 L E D I n d i c
1 . 2 L E D I n d i c
Before you use the Vigor modem, please get acquainted with the LED indicators and
connectors first.
Ethernet Port
LED
Blue LED
Purple LED
Orange LED
Off
USB
Interface
Ethernet Port
Power Jack (DC IN)
Hole
Factory Reset
a t o r s a n d C o n
a t o r s a n d C o n
Power Jack (DC IN)
Status
Blinking
Off
On
Blinking
Off
Connector for a printer.
Explanation
Connecter for xDSL / Cable modem (Giga level) or router.
Connecter for a power adapter.
Explanation
Restore the default settings when any error occurs in VigorAP.
Usage: Use sharp article (e.g., paperclip or pin) to insert into the
hole and keep for more than 10 seconds. Then VigorAP will
restart with the factory default configuration. When purple LED
is On again, it means VigorAP has restarted and is ready to use.
n e c t o r s
n e c t o r s
Explanation
VigorAP is ready and can work normally.
VigorAP is not ready or fails.
Power adapter is plugged in and VigorAP is
initiating.
The firmware upgrade is in process.
VigorAP is powered off.
3
Factory
LED
Reset
VigorAP 910C User's Guide