Table of Contents
Advertisement
I-1-1 LED Indicators and Connectors
Before you use the Vigor modem, please get acquainted with the LED indicators and connectors
first.
LED
5G-2 / 5G-1 / 2.4G
P2 / P1(PoE)
(Left LED)
P2 / P1(PoE)
(Right LED)
Note:
Connector P1(PoE) is used for PoE connection (for indoor use only).
Status
Explanation
On
Wireless function is ready.
Off
Wireless function is not ready.
Blinking
Data is transmitting (sending/receiving).
On
The LAN port is connected.
Off
LAN is disconnected.
Blinking
Data is transmitting (sending/receiving).
On
A normal connection (rate with 1000M) is through its
corresponding port.
Off
The LAN port is connected with a transmission rate of
10/100Mbps if left LED is on.
2
Advertisement
Table of Contents
