Glass And Utensil Damage; Loading The Dishwasher; Unloading The Dishwasher; Basket - Siemens SK Series Operating Instruction

Glass and utensil damage

Causes:
Glass type and glass production
process.
Chemical composition of the
detergent.
Water temperature of the wash
programme.
Recommendation:
Use only glasses and porcelain
which the manufacturer designates
as dishwasher-proof.
Use a detergent which protects
utensils.
Take glass and cutlery out of the
dishwasher as soon as possible after
the programme ends.

Loading the dishwasher

1. Remove large food remnants. It is
not necessary to prerinse utensils
under running water.
2. Place the utensils so that
– they are secure and cannot tip
over.
– all utensils with their openings
face down.
– parts with curves or indentations
are at an angle, thereby allowing
water to drain.
– the spray arm 1" can still rotate
freely.
Very small utensils should not be
washed in the dishwasher, as they can
easily fall out of the utensils basket 1B.

Unloading the dishwasher

Hot utensils are sensitive to shock!
Therefore, when the programme ends,
leave the utensils to cool down in the
dishwasher until they can be handled.
Note
When the programme ends, water
droplets can still be seen inside
the appliance. This does not affect
the drying of the utensils.
B asket 1B
B a s k e t
Utensils en
13