Related Manuals for Siemens SK26E82208
Summary of Contents for Siemens SK26E82208
- Page 1 Dishwasher SK26E82208 Information for Use Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
-
Page 2: Table Of Contents
Table of contents 1 Safety .......... 4 9 Features........ 20 1.1 General information.... 4 9.1 Basket ........ 20 1.2 Intended use....... 4 9.2 Cutlery basket ...... 20 1.3 Restriction on user group... 4 9.3 Folding prongs ...... 21 1.4 Safe installation ...... 4 9.4 Height of tableware .... 21 1.5 Safe use ........ 6 10 Before using for the 1.6 Damaged appliance .... 7... - Page 3 15.3 Setting a programme ..... 29 15.4 Setting additional functions .. 29 15.5 Setting timer programming .. 30 15.6 Starting the programme .. 30 15.7 Interrupting programme .. 30 15.8 Terminate programme.... 30 15.9 Switching off appliance .. 30 16 Basic settings...... 31 16.1 Overview of basic settings .. 31 16.2 Changing basic settings.. 32 17 Cleaning and servicing ....
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... - Page 5 Safety en WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Always use the supplied power cable for the new appliance. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing.
-
Page 6: Safe Use
en Safety 1.5 Safe use WARNING ‒ Risk of serious harm to health! Failure to comply with safety instructions and directions for use on packagings of detergent and rinse aid products may cause seri- ous harm to health. ▶ Follow the safety instructions and directions for use on the packagings of detergent and rinse aid products. -
Page 7: Damaged Appliance
Safety en WARNING ‒ Risk of tipping! Overfilling the Baskets may cause the appliance to tip up. ▶ Never overfill the Baskets with free-standing appliances. WARNING ‒ Risk of electric shock! An ingress of moisture can cause an electric shock. ▶ Only use the appliance in enclosed spaces. ▶... -
Page 8: Risk To Children
en Safety 1.7 Risk to children WARNING ‒ Risk of suffocation! Children may put packaging material over their heads or wrap themselves up in it and suffocate. ▶ Keep packaging material away from children. ▶ Do not let children play with packaging material. Children may breathe in or swallow small parts, causing them to suffocate. -
Page 9: Safety Systems
Safety en 1.8 Safety systems Protect children from possible hazards resulting from the appli- ance. Depending on the features of the model, the appliance comes with a → "Childproof lock", Page 11. -
Page 10: Preventing Material Damage
en Preventing Never re-use water hoses that ▶ Preventing 2 Preventing material have been used before. If the water pressure is too high or damage too low, the appliance may not be able to operate properly. Preventing 2.1 Safe installation Make sure that the water pressure ▶... -
Page 11: Childproof Lock
Childproof lock en 4.3 AquaSensor 3 Childproof lock The AquaSensor is an optical meas- The childproof lock lets you protect uring device (light barrier) which children from possible hazards result- measures the turbidity of the washing ing from the appliance. water. You can save water with the Depending on the features of the AquaSensor. -
Page 12: Installing And Connecting The Appliance
en Installation and connection ¡ Rubber apron When doing so, check that the wastewater hose is not kinked, ¡ Mains cable crushed or twisted. ¡ Quick reference guide Also check that there is no cover 5.2 Installing and connecting in the drainage system preventing the wastewater from being dis- the appliance charged. - Page 13 Installation and connection en ¡ Please note that the water safety system is only functional if there is a power supply. Insert the non-heating appliance plug of the power cable into the appliance. Insert the mains plug of the appli- ance into a nearby socket. The connection data for the appli- ance can be found on the rating plate.
-
Page 14: Familiarising Yourself With Your Appliance
en Familiarising yourself with your appliance 6 Familiarising yourself with your appliance 6.1 Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with E number and FD num- ber → Page 49. The data you need for Customer Service → Page 48. -
Page 15: Controls
Familiarising yourself with your appliance en Detergent dispenser Detergent → Page 25 is added to the de- tergent dispenser. Cutlery basket Cutlery basket → Page 20 Dispenser for special salt Add special salt to the dispenser for spe- cial salt. → "Water softening system", Page 22 Spray arm The spray arm washes the tableware in the basket. - Page 16 en Familiarising yourself with your appliance ON/OFF button Switching on the appliance → Page 29 Switching off the appliance → Page 30 Programme selector Programmes → Page 17 Start button and reset Starting the programme → Page 30 button Terminating the programme → Page 30 Display The display shows information about the remaining running time or the ba- sic settings.
-
Page 17: Programmes
Programmes en 7 Programmes You can find an overview of the pro- ning time will change if the rinse aid grammes that can be selected here. system is switched off or rinse aid Different programmes, which can be needs to be added. found on the control panel of your The consumption values can be appliance, are available depending... - Page 18 en Programmes Programme Programme se- Additional func- quence tions Dishes: Most economical: ¡ Cleaning mixed ¡ Pre-rinse → "Additional func- Eco 50° dishes and cut- ¡ Cleaning 50 °C tions", Page 19 lery. ¡ Intermediate Level of soiling: rinse ¡ Removing com- ¡ Final rinse mon household 66 °C food remnants...
-
Page 19: Information For Test Institutes
Additional functions en 7.1 Information for test insti- Additional func- tion tutes ¡ To ensure a Test institutes are provided with in- higher hygiene Hygiene formation for comparability tests, e.g. status for the according to EN60436. appliance and These are the conditions for conduct- dishes, the ing the tests, however they are not temperature is... -
Page 20: Additional Functions
en Features Additional func- Additional func- tion tion ¡ Switch on with the running mixed loads time is exten- IntensiveZone containing ded. dishes with dif- ferent soiling levels, e.g. 9 Features place very soiled pots You can find an overview of the pos- and pans in sible features of your appliance and the bottom... -
Page 21: Folding Prongs
first time en 9.3 Folding prongs 9.4 Height of tableware Use the folding prongs to position You can place tableware with a max- tableware securely, e.g. plates. imum height of 28 cm in the basket. first time 10 Before using for the first time first time 10.1 Performing the initial configuration On initial start-up or after a reset to... -
Page 22: Water Softening System
en Water softening system To ensure good dishwashing results, 11 Water softening sys- you can treat the water with special salt and the water softening system. To avoid damage to the appliance, water with a hardness above 9 °E Hard water leaves limescale on the must be softened. -
Page 23: Switching Off Water Softening System
Water softening system en ter hardness: the higher the water Place the lid back on the dis- hardness, the greater the amount of penser and turn to close. special salt required. 11.4 Switching off water ATTENTION! softening system Detergent may damage the water softening system. -
Page 24: Rinse Aid System
en Rinse aid system Spilled rinse aid can cause ex- 12 Rinse aid system cessive frothing during the wash cycle. You can use the rinse aid system Close the lid of the dispenser for and rinse aid to get tableware and rinse aid. glasses rinsed perfectly without a The lid clicks into position. -
Page 25: Detergent
Detergent en Turn the programme selector until Detergent Description the display shows r:04. Powder de- Powder detergent is Release the button. tergent recommended for Turn the programme selector until shorter Programmes. the display shows r:00. The dosage can be Press to save the setting. adjusted to the level of soiling. -
Page 26: Unsuitable Detergents
en Detergent For better washing and drying results 13.3 Information on deter- and to avoid damage to the appli- gents ance, please additionally use Special salt → Page 22 and Rinse aid Follow the instructions on detergents → Page 24. in everyday use. ¡ Detergents marked as "organic" or Combined detergent "ecological"... -
Page 27: Tableware
Tableware en Add the detergent to the dry deter- 14 Tableware gent dispenser. Only clean tableware that is suitable 50 ml for dishwashers. 25 ml Note: Decorated glassware and parts 15 ml made of aluminium or silver may fade or discolour with dishwashing. Delicate types of glass may turn cloudy after a few washing cycles. -
Page 28: Arrange Tableware
en Tableware load with tableware and cutlery). Cause Recommenda- → "Technical specifications", tion Page 50 The chemical Use a detergent ¡ For better washing and drying res- composition of marked by the ults, position items with curves or detergent causes manufacturer as recesses at an angle so water can damage. -
Page 29: Removing Tableware
operation en 14.3 Removing tableware 15.2 Switching on the appli- ance WARNING Press . ▶ Risk of injury! Hot tableware can cause burns to the The Eco 50° programme is set by skin. When hot, tableware is sensitive default. to shock, may crack and can result in If you do not perform any actions injury. -
Page 30: Setting Timer Programming
en operation Press to resume the pro- 15.5 Setting timer program- gramme. ming 15.8 Terminate programme You can delay the start of the pro- gramme by up to 24 hours. To end a programme early or to Press . switch from a programme that has a "h:01"... -
Page 31: Basic Settings
Basic settings en 16 Basic settings You can configure the basic settings for your appliance to meet your needs. 16.1 Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Display text Selection Description Water hardness H:04 H:00 - H:07 Set the water softening sys- tem to your water hardness. -
Page 32: Changing Basic Settings
en Cleaning and servicing 16.2 Changing basic settings 17.2 Self-cleaning interior Press . To remove deposits, the appliance self-cleans the interior at regular inter- Press and hold . vals. Turn the programme selector until The programme sequence is auto- the display shows the required set- matically adjusted for self-cleaning, ting. -
Page 33: Filter System
Cleaning and servicing en Pull down the micro filter to re- 17.5 Filter system move. The filter system removes coarse soiling from the dishwashing cycle. Press the locking catches gether and lift the coarse filter out . Micro filter Fine filter Coarse filter Cleaning filters Soiling in the dishwashing water may... -
Page 34: Cleaning The Spray Arm
en Cleaning and servicing Check the outlet nozzles on the 17.6 Cleaning the spray arm spray arm for blockages under Limescale and soiling in the dish- running water and remove any for- washing water may block the nozzles eign objects. and bearing of the spray arm. Clean Insert the spray arm. -
Page 35: Troubleshooting
Troubleshooting en 18 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 36 en Troubleshooting Fault Cause and troubleshooting E:18 or indicator for Turn on the water tap. ▶ water supply lights up. The flow rate must be at least 10 l/min when the water supply is open. The filters in the water connection of the supply or AquaStop hose are blocked.
- Page 37 Troubleshooting en Fault Cause and troubleshooting E:25 lights up. Wastewater pump is blocked. Clean the wastewater pump. ▶ → "Clean wastewater pump", Page 47 Cover of the wastewater pump is loose Secure the cover of the Wastewater pump ▶ → Page 47 so it clicks into position. E:27 lights up.
- Page 38 en Troubleshooting Fault Cause and troubleshooting Tableware is not dry. Position tableware at an angle where possible. ▶ The combined detergent used has a poor drying per- formance. Use rinse aid to improve drying performance. Use a different combined detergent with a better drying performance.
- Page 39 Troubleshooting en Fault Cause and troubleshooting Remnants of food on Tableware is placed too close together or basket is tableware. overfilled. Arrange tableware with sufficient space in between. The spray jets must reach the surfaces of the table- ware. Avoid points of contact. Spray arm rotation is blocked.
- Page 40 en Troubleshooting Fault Cause and troubleshooting Detergent residue in Lid of the detergent dispenser is blocked by items of the appliance tableware parts and will not open. Arrange tableware in the top basket tableware so the tab collecting tray is not obstructed by table- ware.
- Page 41 Troubleshooting en Fault Cause and troubleshooting Stubborn white coat- Detergent substances are deposited there. These ings are present on coatings cannot generally be removed with chemicals. tableware, inside the Change your detergent → Page 25. ▶ appliance or the door. Clean the appliance mechanically. ▶...
- Page 42 en Troubleshooting Fault Cause and troubleshooting Coloured coatings You can remove deposits with Mechanical cleaning (blue, yellow, brown) → Page 32 or a machine cleaning product. It may that are difficult or im- not always be possible to completely remove de- possible to remove posits but they are harmless to health.
- Page 43 Troubleshooting en Fault Cause and troubleshooting Removable streaks Tableware has been precleaned too intensely. The are present on sensors chose a weaker programme. Stubborn soiling glasses, glassware cannot be entirely removed. with a metallic appear- Only remove large remnants of food and do not ▶...
- Page 44 en Troubleshooting Fault Cause and troubleshooting Excessive formation of Change the brand of detergent. ▶ foam occurs. Fault Cause and troubleshooting Special salt refill indic- Insufficient special salt. ator lights up. Add Special salt → Page 22. ▶ Sensor does not detect special salt tablets. Do not use special salt tablets.
- Page 45 Troubleshooting en Fault Cause and troubleshooting Programme starts You did not wait until programme ended. automatically. → "Terminate programme", Page 30 ▶ Appliance stops dur- Appliance door is not closed properly. ing the programme or Close the appliance door. ▶ cuts out. Power and/or water supply has been interrupted. Check the power supply.
- Page 46 en Troubleshooting Fault Cause and troubleshooting Knocking or rattling Distribute the tableware evenly. ▶ noise. Load the appliance with more tableware. ▶ Light items of tableware move about during the wash cycle. Position light items of tableware securely. ▶...
-
Page 47: Clean Wastewater Pump
Transportation, storage and disposal en Pull up and remove the pump 18.1 Clean wastewater pump cover. Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. WARNING Risk of injury! Sharp and pointed objects or frag-... -
Page 48: Transporting The Appliance
en Customer Service the appliance door beyond repair 19.3 Transporting the appli- so that the appliance door will no ance longer close. To avoid damage to the appliance, Unplug the appliance from the empty it before transporting. mains. Note: Always transport the dish- Cut through the power cord. -
Page 49: Customer Service
Customer Service en wards. The tap only needs to be 20.1 Product number (E-Nr.) turned off if you are away from and production number home for a long period, e.g. on (FD) holiday for several weeks. You can find the product number (E- Nr.) and the production number (FD) on the appliance's rating plate. -
Page 50: Technical Specifications
en Technical specifications 21 Technical specifications Weight Max.: 24 kg Voltage 220 - 240 V, 50 Hz or 60 Hz Power rating 2000 - 2400 W Fuse 10 - 16A Water pressure ¡ min. 50 kPa (0.5 bar) ¡ max. 1000 kPa (10 bar) Inlet rate Min. 10 l/min Water temperature Cold water. Hot water max.: 60 °C Capacity 6 place settings... - Page 52 BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY siemens-home.bsh-group.com Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001778792* 9001778792 (020909) 550 EG...