Filters; Spray Arm - Siemens SK Series Operating Instruction

Hide thumbs Also See for SK Series:
Table of Contents

Advertisement

en
Cleaning and maintenance

Filters

The filters 1* keep large foreign
objects in the rinsing water away from
the pump. These foreign objects may
occasionally block the filters.
The filter system consists of a coarse
filter, a flat fine filter and a microfilter.
1. After each washing cycle check the
filters for residue.
2. Unscrew filter cylinder as illustrated
and take out filter system.
3. Remove any residue and clean filters
under running water.
4. Re-install filter system in reverse
sequence and ensure that the arrow
marks are opposite each other after
closing the filter system.
22

Spray arm

Limescale and dirt from the rinsing
water may block nozzles and the
bearing assemblies of the spray
arm 1".
1. Check outlet nozzles on the spray
arm for blockages.
2. Remove the spray arm upwards.
3. Clean the spray arm under running
water.
4. Lock the spray arm into position.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents