Configuring Wireless # (Wlan Number) Settings - Ruckus Wireless ZoneFlex T301s User Manual

Table 25. Advanced wireless common settings (Continued)
Protection Mode (Disabled by default.) When you activate protection, you control how
3 Click Update Settings to save and apply the changes.

Configuring Wireless # (WLAN Number) Settings

The AP provides up to eight wireless LANs per radio that can be individually
configured to provide different kinds of services for different wireless clients, traffic
types, or user groups. Each WLAN can be configured with separate security
settings, VLANs, access controls and rate limiting policies, among other settings.
1 Go to Configuration > Wireless/Radio 2.4G/Radio 5G. The Configuration >
Wireless > Common page appears.
2 Click one of the eight Wireless # (WLAN number) tabs. The selected
Configuration > Wireless > Wireless # (WLAN number) page appears.
Ruckus Wireless Outdoor AP 100.1.0 User Guide, 800-70863-001 Rev A
802.11 devices know when they should communicate with another
device. This is important in a mixed environment of both 802.11b and
802.11g/11n clients.
Activating this option (and configuring the settings)
WARNING:
boosts the interoperability of 802.11b and 802.11g/11n devices
but severely decreases performance.
• CTS-only : Choose this option to force all destination devices to
acknowledge their ability to receive data when a transmission is
initiated. Use this option for compliance with the Wi-Fi Alliance
certification.
RTS-CTS : Choose this option to force both sending and receiving
•
devices to confirm a data exchange on both ends before
proceeding.
Configuring Wireless Settings
Configuring Wireless # (WLAN Number) Settings
90