Automatic Calibration - Siemens HB24D 52 Series Instruction Manual

¯
Display
Automatic
calibration
After moving house
All manuals and user guides at all-guides.com
If the water tank is empty, a signal sounds and the
¯
symbol appears. Operation is stopped.
1. Open the appliance door carefully. Steam will
escape.
2. Remove the water tank, fill it with water and
reinsert it.
3. Press the † button.
The boiling temperature of water depends on the air
pressure. During calibration, the appliance is set to
the pressure ratios at the place of installation. This
occurs automatically when steaming for the first time
at 100 ºC. This causes more steam to develop than
usual.
So that the appliance automatically adjusts itself to
the new location, you must reset the appliance to the
factory settings (see Section: Basic settings).
11