Accessories; Automatic Calibration; Before Using The Appliance For The First Time; Setting The Clock And Language - Siemens HB36D..5 Series Instruction Manual

Accessories

Use only the accessories supplied with the product or available
from the after-sales service. They are specially designed for
your appliance.
Your appliance is equipped with the following accessories:
You can obtain further accessories from specialist retailers:
Accessories
Cooking container, solid, GN
deep
Cooking container, perforated, GN
40 mm deep
Cooking container, solid, GN
deep (baking tray)

Before using the appliance for the first time

In this section you will find out which steps are required before
using the appliance for the first time:

Setting the clock and language

■
Setting the water hardness range
■
Starting the appliance for the first time
■
Cleaning the accessories before use
■
Fitting the grease filter
■
wire rack
For ovenware, cakes and casserole
dishes, and for roasting
Cooking container, perforated,
Y
GN , 40 mm deep
For steaming vegetables, juicing
berries and defrosting
Cooking container, solid, GN
40 mm deep
For cooking rice, pulses and
cereals
Cooking container, perforated,
Z
GN , 40 mm deep
for the steaming of whole fish or
large quantities of vegetables, for
juicing berries, etc.
Cooking container, solid, GN
28 mm deep (baking tray)
For baking tray bakes and for
catching dripping liquid during
steaming
Grease filter
protects the fan of the back panel
of the cooking compartment from
becoming dirty (e.g. from
spattering)
Order no.
HZ36D533
, 40 mm
Z
HZ36D533G
,
Z
HZ36D532
, 28 mm
Z
Accessories
Cooking container, solid, GN
deep
Cooking container, perforated, GN
40 mm deep
Porcelain cooking container, solid, GN
Porcelain cooking container, solid, GN
Wire rack
Roasting set
Cleaning sponge
Descaler
Y
,
Honeycomb microfibre cloth
The cooking containers may warp during cooking. This is
caused by the considerable temperature differences acting on
the accessories. It may occur if only a part of the accessory is
covered or if you place frozen items, such as pizza, on the
accessory.

Automatic calibration

Z
,
The boiling temperature of water depends on the air pressure.
During calibration, the appliance is adapted to the pressure
conditions in the location where it is installed. This happens
automatically when you first use the appliance (see section:
First use). More steam develops than usual.
It is important that the appliance steams without interruption for
20 minutes at 100 °C. Do not open the appliance door during
this time.
If the appliance was not able to calibrate itself automatically (for
example, because the appliance door was opened), the
calibration process is carried out again during the next cooking
operation.
After moving house
So that the appliance automatically adjusts itself to its new
location, you must reset the appliance to the factory settings
(see section: Basic settings) and repeat the initial start-up
process (see section: First use).
After a power cut
The appliance saves the calibration settings even in the event
of a power cut or disconnection from the mains. Recalibration
is not necessary.
Setting the clock and language
After making the electrical connection, "Clock" and "Select
language" appear in the display. Set the clock and the
language for the display, if required.
  6HWWLQJ WKH FORFN
7LPH RI GD\
 
Set the current time using the rotary selector.
1.
Press the button to switch to "select language".
¿
2.
Set the required language using the rotary selector.
3.
Press the button.
0
4.
The time and language are saved. The current time is
displayed.
Order no.
HZ36D513
Y , 40 mm
HZ36D513G
,
Y
HZ36D533P
Z
HZ36D513P
Y
HZ36DR
HZ36DB
643 254
311 138
460 770
6HOHFW ODQJXDJH
(QJOLVK
7