4.7.3.1 Upgrade Firmware
Firmware File URL
Description
Value Range
Default Value
4.7.4 Export Logging File
This screen allows you to specify the Logging File to export when logging.
4.7.4.1 Export Logging File
Logging File Type
Description
Value Range
Default Value
4.7.5 Reset to Defaults
This screen allows you to reset the carrier default settings made through the Web user interface to their default
values by clicking [Reset to Carrier Defaults]. After you click this button, a dialog box is displayed, asking
whether you want to reset the settings. Click OK to reset, or Cancel not to.
Document Version 2015-12
Specifies the URI where the firmware file is stored.
Max. 384 characters
Not stored.
Selects the Logging File Type setting.
•
Power Down
•
Event
•
SIP Packet
Note
•
The line break code for the log file is <LF>.
•
If a file is exported when Power Down is selected, the saved file
is power.log.
•
If a file is exported when Event is selected, the saved file is
event_log.txt.
•
If a file is exported when SIP Packet is selected, the saved file
is sip_trace_log.txt.
Power Down
4.7.5 Reset to Defaults
Administrator Guide
157