4.5.1 SIP Settings
4.5.1.1 User Agent
User Agent
Description
Value Range
Default Value
Configuration File Reference
4.5.1.2 NAT Identity
Enable Rport (RFC 3581)
Description
Value Range
Default Value
Configuration File Reference
Enable Port Punching for SIP
Description
Value Range
Default Value
Configuration File Reference
118
Administrator Guide
Specifies the text string to send as the user agent in the headers of SIP
messages.
Max. 64 characters
Note
•
If "{mac}" is included in this field, it will be replaced with the
unit's MAC address in lower-case.
•
If "{MAC}" is included in this field, it will be replaced with the
unit's MAC address in upper-case.
•
If "{MODEL}" is included in this field, it will be replaced with the
unit's model name.
•
If "{fwver}" is included in this field, it will be replaced with the
firmware version of the unit.
•
If "{sipver}" is included in this parameter, it will be replaced with
the SIP software version of the unit.
Panasonic {MODEL} hw01.00 fw{fwver} {mac}
SIP_USER_AGENT (Page 236)
Selects whether to add the 'rport' parameter to the top Via header field
value of requests generated.
•
Yes
•
No
No
SIP_ADD_RPORT (Page 235)
Specifies the interval, in seconds, between transmissions of the Keep
Alive packet in order to maintain the NAT binding information for SIP
packet.
0, 10–300
0: Disable
0
PORT_PUNCH_INTVL (Page 236)
Document Version 2015-12