Overview Of Programming - Panasonic KX-HDV130 Administrator's Manual

6. [ ]/[ ]: "Auto" ®
•
Select "Manual" to enter the addresses for DNS1 (primary DNS server) and, if necessary, DNS2
(secondary DNS server) manually, and then press
To configure network settings automatically using RA
1.
2. [ ]/[ ]: "System Settings" ®
3. [ ]/[ ]: "Network Settings" ®
4. [ ]/[ ]: "IPv6 Settings" ®
5. [ ]/[ ]: "RA" ®
6.
Enter the addresses for DNS1 (primary DNS server) and, if necessary, DNS2 (secondary DNS server)
manually, and then press
To configure network settings manually
1.
2. [ ]/[ ]: "System Settings" ®
3. [ ]/[ ]: "Network Settings" ®
[ ]/[ ]: "IPv6 Settings" ®
4.
5. [ ]/[ ]: "Static" ®
6.
Enter the IP address, Prefix (for IPv6), Default Gateway, DNS1 (primary DNS server), and, if necessary,
DNS2 (secondary DNS server), and then press
Note
•
If your phone system dealer/service provider does not allow you these settings, you cannot change
them even though the unit shows the setting menu. Contact your phone system dealer/service provider
for further information.
•
If you select "DHCP" for the connection mode, all the settings concerning static connection will be
ignored, even if they have been specified.
•
If you select "DHCP" for the connection mode and "Auto" for DNS, the DNS server settings (DNS1 and
DNS2) will be ignored, even if they have been specified.

1.1.4 Overview of Programming

There are 3 types of programming, as shown in the table below:
Programming
Type
Phone user
interface
programming
Web user
interface
programming
Configuration file
programming
Document Version 2015-12
OK
OK
OK
OK
OK
.
OK
OK
OK
OK
OK
Description
Configuring the unit's settings directly from the unit.
Configuring the unit's settings by accessing the Web
user interface from a PC connected to the same
network.
Configuring the unit's settings beforehand by creating
configuration files (pre-provisioning), and having the
unit download the files from a server on the Internet
and configure its own settings (provisioning).
.
OK
.
OK
1.1.4 Overview of Programming
References
® 1.1.5 Phone User Interface
Programming
® Section 3 Phone User
Interface Programming
® 1.1.6 Web User Interface
Programming
® Section 4 Web User
Interface Programming
® Section 2 General
Information on Provisioning
® Section 5 Configuration
File Programming
Administrator Guide 25