Con_Req_User_Id - Panasonic KX-HDV130 Administrator's Manual

CON_REQ_USER_ID

Value Format
Description
Value Range
Default Value
CON_REQ_PASS
Value Format
Description
Value Range
Default Value
ANNEX_G_STUN_ENABLE
Value Format
Description
Value Range
Default Value
ANNEX_G_STUN_SERV_ADDR
Value Format
Description
Document Version 2015-12
STRING
Specifies the user name used to authenticate an ACS making a
Connection Request to the CPE.
Max. 256 characters
Empty string
STRING
Specifies the password used to authenticate an ACS making a
Connection Request to the CPE.
Note
•
When the "CON_REQ_USER_ID" parameter is specified, an
empty string for this parameter is not allowed.
Max. 256 characters
Empty string
BOOLEAN
Specifies whether or not the CPE can use STUN. This applies only to
the use of STUN in association with the ACS to allow UDP Connection
Requests.
•
Y (Enable)
•
N (Disable)
N
STRING
Specifies the host name or IP address of the STUN server for the CPE
to send Binding Requests.
Note
•
This setting is available only when
"ANNEX_G_STUN_ENABLE" is set to "Y".
•
If the value for this setting is an empty string and
"ANNEX_G_STUN_ENABLE" is set to "Y", the CPE must use the
address of the ACS extracted from the host portion of the ACS
URL.
5.3.9 TR-069 Settings
Administrator Guide 201