4.5.3 VoIP Settings
Maximum RTP Port Number
Description
Value Range
Default Value
Configuration File Reference
Telephone-event Payload Type
Description
Value Range
Default Value
Configuration File Reference
4.5.3.2 Voice Quality Report
Server Address
Description
Value Range
Default Value
Configuration File Reference
Port
Description
Value Range
Default Value
Configuration File Reference
Enable PUBLISH
Description
128
Administrator Guide
Specifies the highest port number that the unit will use for RTP packets.
1424–59998 (even number only)
32766
RTP_PORT_MAX (Page 266)
Specifies the RFC 2833 payload type for DTMF tones.
Note
•
This setting is available only when [DTMF Type] is set to
[RFC2833].
96–127
101
TELEVENT_PAYLOAD (Page 257)
Specifies the IP address or FQDN of the collector server.
Max. 256 characters
Not stored.
VQREPORT_COLLECTOR_ADDRESS (Page 270)
Specifies the port of the collector server.
1–65535
5060
VQREPORT_COLLECTOR_PORT (Page 270)
Selects the sending type of the VQ report using PUBLISH.
Document Version 2015-12