Checking The Firmware - Panasonic KX-UTG 300B User Manual

Checking the Firmware

The Panasonic KX-UTG 300B should be on Firmware 03.137. The steps below detail how to upgrade the
firmware if necessary.
1. Enable the Web Configuration Utility and obtain the IP address of the phone. Select the Menu
softkey, and then select Settings and press #534 on the keypad to enable embedded web. Next,
select the Menu softkey again, and then select Settings and locate Information Display to locate
your phones IP Address.
2. Enter the IP address of the phone into the address bar of a web browser (Internet Explorer,
Firefox, Chrome, etc.) (Figure 3-11).
3. Login with admin for the username and adminpass for the password (Figure 3-12).
Figure 3-11: Navigate to the Phone's IP Address
Figure 3-12: Log In to Phone Interface
18 | P a g e
© Nextiva, All Rights Reserved