Table of Contents
Advertisement
Matched Length
No Answer Timeout
Create Route Plan>Primary Route
Item
Outgoing Type
Hunting Type
DM Group
Create Route Plan>Backup Route
Item
Backup Route Active
Outgoing Type
Hunting Type
Routing List
Route DM Group
line ID. Only the call is coming from the selected line will be
accepted for this route.
Matched DNIS (called number) length. To ignore the length,
please set to 0.
How long does the hunting continue to next when the called
target doesn't answer.
Explanation
Outgoing call type (FXO or FXS or VOIP)
The hunting method was used for this route.
Priority Ring: The call was hunted based on the routing list
order one by one.
Cyclic Ring: The call was hunted based on the cyclic basis.
This is the recommended method.
Routing List:
The routing target list was used for this route.
Select DM group 1 to 4 in case that it requires a DM (for
example, remove the prefix) before making the call.
Explanation
Active the backup route or not.
The backup route outgoing call type.
The hunting method will be used for this route. Please refer to
the Primary Route.
The backup routing target list will be used for this route.
Select DM group 1 to 4 in case the backup required the DM
before to make the call. The DNIS is unchanged by the primary
route DM and same as the DNIS before routing. For example,
the DNIS is 886282265699 and primary DM group remove 886
and use it (DNIS = 282265699) to make call. When backup
route is started, the DNIS is still unchanged as 886282265699.
This makes the DM easy to predict and implement.
72
Internet Telephony Gateway
VGW-400 Series
Advertisement
Table of Contents
