Rear Panel of the VGW-400 Series (VGW-400FO)
LED definitions
LED definitions
LED
Power
Status
Proxy
WAN
LAN
Port 1 - 4
Port
Reset
FXS Ports
Function Description
When the power adapter is connected, the LED will light up
green.
When system startup successfully, the LED will light up green.
When the gateway is registered successfully to a SIP Proxy, this
will light up green.
This LED lights up green when the gateway's WAN port is
physically connected to the public internet. When data is
transmitted through this port, it will flash green.
This LED lights up green when the gateway's LAN port is
physically connected to a local network (Refer to Rear Panel
section). When data is transmitted through this port, it will flash
green.
The status LED for FXO and FXS ports, these LED light up amber
orange when connected phone is engaged in a conversation
mode (FXO). It will flash amber orange when there is an
incoming call (FXS).
Function Description
Press and hold over 5 seconds to reload factory default setting,
this action will erase all existing settings configured on this
gateway.
The status LED for FXS port, it will light up amber orange when
the connected phone's handset is lifted, or when the connected
13
Internet Telephony Gateway
VGW-400 Series