Keep Alive Time(sec)
Secondary Proxy
Secondary proxy
server
Secondary proxy port
Secondary outbound
Proxy server
Outbound Proxy server
port
Register Expire:
Secondary Proxy
server keep Alive
Keep Alive Time(sec)
8.3 Caller ID
The call ID sends to FXS port of analog phone set to display caller name or phone number.
Item
Caller ID Mode
Polarity Reverse before
caller ID
Dual tone before caller
Specify time to send SIP register message to proxy server.
Enable secondary proxy or not. When enable it, the primary
and secondary proxy will be registered at the same time.
Secondary SIP registrar server address
Secondary SIP registrar server port number
Secondary outbound proxy server address Secondary
Secondary outbound proxy server port number
SIP register time to leave
Using through NAT and keep the port.
Specify time to send SIP register message to proxy server.
Explanation
Caller ID mode to be used for phone (FSK Bellcore, FSK ETSI,
DTMF)
Start polarity reverse to FXS port before sending the caller ID
Send Dual Tone before caller ID (for FSK ETSI used only)
57
Internet Telephony Gateway
VGW-400 Series