Table of Contents
Advertisement
Item
Incoming Call Type
Matched Prefix
Matched Incoming List
Matched Length
No Answer Timeout
Create Route Plan>Primary Route
Item
Outgoing Type
Hunting Type
DM Group
Create Route Plan>Backup Route
Item
Backup Route Active
Outgoing Type
Hunting Type
Routing List
Explanation
Incoming call type
VOIP: The incoming SIP call type
FXS: The FXS extensions incoming call type
Matched DNIS (called number) prefix
Matched DNIS incoming interface target
For FXS incoming call type, the incoming target will be the line
ID. Only the call is coming from the selected line will be
accepted for this route.
Matched DNIS (called number) length. To ignore the length,
please set to 0.
How long does the hunting continue to next when the called
target doesn't answer.
Explanation
Outgoing call type (FXO or VOIP or FXS)
The hunting method can be used for this route.
Priority Ring: The call was hunted based on the routing
list order one by one.
Cyclic Ring: The call was hunted based on the cyclic
basis. This is the recommended method.
Routing List:
The routing target list was used for this route.
Select DM group 1 to 4 in case that it requires a DM routes (for
example, remove the prefix) before making the call.
Explanation
Active the backup routes or not.
Define backup routes outgoing call type.
The hunting method was used for this route. Please refer to the
Primary Route.
The backup routing target list was used for this route
69
Internet Telephony Gateway
VGW-400 Series
Advertisement
Table of Contents
