Table of Contents
Advertisement
Route DM Group:
2 special default route, "VOIP Default Route" and "FXS default Route", are used as the
default routing when there is not any other routing are matched. It is not recommended to
disable these 2 default routes. The FXS default route was used as FXS outgoing call's default
routes. VOIP default route is used as VOIP incoming call's default routing.
In this mode all of the VOIP and FXO incoming calls were forced to route to
FXS port. The VOIP incoming call can't route to FXO port to dial out.
11.2 For Non-PABX Mode interface
For this interface, it could be routed to VOIP and FXO and FXS and vice versa. You can ignore
the routing plan if you don't need it for FXS interface.
Item
Incoming Call Type
Matched Prefix
Matched Incoming List
Matched Length
Outgoing Type
Select DM group 1 to 4 in case that the backup required the DM
before making the call. The DNIS is unchanged by the primary
route DM and the same as the DNIS before routing. For
example, the DNIS is 886282265699 and primary DM group
remove 886 and use it (DNIS = 282265699) to make call. When
backup route is started, the DNIS is still unchanged as
886282265699. This makes the DM easy to predict and
implement.
Explanation
Incoming call type (VOIP or FXS or FXO)
Matched DNIS (called number) prefix
Matched DNIS incoming interface target
Matched DNIS (called number) length
The outgoing call type (FXS or VOIP or FXO)
70
Internet Telephony Gateway
VGW-400 Series
Advertisement
Table of Contents
