Canon LBP352 User Manual page 392

( )
Settings>
Performing a Hard Reset(P. 451) )
IPSec
Select whether to perform encrypted communication by establishing a virtual private network (VPN) via IPSec.
Use the Remote UI to register and specify the security policies.
Off
On
( )
Settings>
Hard Reset(P. 451) )
Sleep Notif. Set.
Specify settings for SLP communication to notify imageWARE of the power status of the machine. If you set
<Sleep Mode Notif.> to <On>, you can expect the machine to avoid unnecessary communication during sleep
mode and reduce the total power consumption.
Software(P. 238)
Sleep Mode Notif.
Enable or disable SLP communication. If you select <On>, the power status of the machine is notified to
imageWARE.
Off
On
( )
Notif. Set.>
Performing a Hard Reset(P. 451) )
*
Port Number
Enter the port number for SLP communications with management software.
1 to 11427 to 65535
Setting Menu List
<Network> Check the message
<Discovery Response>
<Network> Check the message
<IPSec> <Off> or <On>
Configuring Settings for Device Management
<Network> Check the message
<Sleep Mode Notif.>
385
<TCP/IP
<Off> or <On> Perform a hard reset (
Configuring IPSec Settings(P. 298)
<TCP/IP
Perform a hard reset (
<TCP/IP Settings>
<Off> or <On> Perform a hard reset (
Performing a
<Sleep