Optimal Balance
The machine returns from sleep mode rapidly. When the devices directly connected to the machine support
EEE (Energy Efficient Ethernet), power consumption can be reduced to a greater degree. Normally use this
setting.
Exit Speed
The machine returns from sleep mode more rapidly.
Energy Saving
Communication speed during sleep mode is reduced for lowest power consumption.
●
This item is available when <Sleep Mode> is set to <High (Deep Sleep)>.
IEEE802.1X
Enable or disable IEEE 802.1X authentication. Use the Remote UI to specify detailed settings that are applied when
IEEE802.1X authentication is enabled.
Off
On
(
message
Reset(P. 451) )
Address Filter
Enable or disable communication restricted with the IP address and MAC address. Use the Remote UI to specify the
address to restrict.
Basic Printing Operations(P. 78)
Off
On
(
<On>
Setting Menu List
Configuring IEEE 802.1X Authentication(P. 309)
)
<Network>
Check the message
<Off> or <On>
)
<Network>
Check the message
Perform a hard reset (
Perform a hard reset (
Performing a Hard Reset(P. 451) )
392
Entering Sleep Mode(P. 68)
<IEEE802.1X>
Check the
Performing a Hard
<Address Filter>
<Off> or