Align the paper guides securely against the edges of the envelopes
●
Paper guides that are too loose or too tight can cause paper misfeeds or paper jams.
6
Lower the envelope pressure plate.
»
Continue to
When changing the paper size or type
●
The factory default setting for paper size is <Env. DL>. If you load a different size or type of paper into the
machine, make sure to change the settings. If you do not change the settings, a paper jam or printing
error may occur.
Printing on the Back Side of Printed Paper (Manual 2-Sided Printing)
You can print on the back side of printed paper. Flatten any curls on the printed paper and insert it into the
multi-purpose tray (
(previously printed side face down).
●
When you want to print on the back side of the paper that is already printed, set <Manual 2-Sided (MP)> to
<2nd Side> in the setting menu of the operation panel.
●
Load one sheet of paper each time you print.
●
You can use only the paper printed with this machine.
●
You cannot print on the side that has previously been printed on.
LINKS
Loading Preprinted Paper(P. 55)
Paper(P. 569)
Optional Items(P. 575)
Basic Operations
Specifying Paper Size and Type for the Envelope Feeder (Option)(P. 65)
Loading Paper in the Multi-Purpose Tray(P. 44) ), with the side to print face up
Manual 2-Sided (MP)(P. 458)
52