Canon LBP352 User Manual page 489

● Shut down the machine, wait for 10 seconds or more, and turn ON the power again.
Turning ON/OFF the Power(P. 33)
A7 nn ERROR (nn: 2-digit alphanumeric)
An abnormality has occurred in the machine, resulting in malfunction.
● Shut down the machine, wait for 10 seconds or more, and turn ON the power again.
Turning ON/OFF the Power(P. 33)
Amount in cart. cannot be displ. correctly.
A toner cartridge may be set that cannot guarantee print quality because it has reached the end of its
lifetime or for other reasons.
● Replacing the toner cartridge with a new one is recommended.
Replacing Toner Cartridges(P. 521)
The toner cartridge used may not be a genuine Canon product.
● Only genuine Canon toner cartridges should be used as replacement toner cartridges.
Consumables(P. 573)
● You can continue printing when this message is displayed, but the print quality may deteriorate.
Doing so may result in damage to the machine.
An error occurred while receiving.
Unanalyzable data has been received or a timeout error has occurred during receipt of print data.
● Press (
● Check the status of the network that you are using because the network may have a problem.
BT Clock error.
The clock built in the machine has a failure.
● You can continue printing with the clock left faulty, but logs including the print log will not be generated
properly. Contact your local authorized Canon dealer.
Cannot decode data.
Data for Encrypted Print has failed in analysis.
● Perform a soft reset, and print the file again.
Soft Reset(P. 451)
● When you press
Troubleshooting
) to cancel the print job, and print the file again.
( ), the print job is canceled.
482