Saving/Loading Registered Data - Canon LBP352 User Manual

Saving/Loading Registered Data

Menu options data that has been registered in the machine can be saved in your computer (export). Data that is saved
on your computer can also be registered in the machine (import). Data exported from this machine can be imported to
another machine of the same model. So you can easily copy a variety of settings data to multiple machines. To use
these features, it is required that you have logged on in Management Mode.
Saving Registered Data(P. 354)
Loading Registered Data(P. 356)
Do not proceed to an import/export operation immediately after the power is turned
ON
● After the power is turned ON, wait until the <Starting up... 80 Initializing MEAP. Do not turn power OFF.>
message disappears. If you proceed to an import/export operation while this message is displayed, saving/
loading of registered data cannot be performed correctly.
Do not turn OFF the machine until the export/import process is complete
● It may take a few minutes to complete the process. If the machine is turned OFF during the process, it may
result in damage to data or the machine.
Do not operate the machine during the export/import process
● Before exporting/importing, check that no operation such as printing documents is currently processing.
Import/export using the operation panel
● You can also save/load settings data via a USB memory device by using the operation panel of the machine.
Import/Export Set.(P. 413)
Using Remote UI
353
0X7U-052