Canon LBP352 User Manual page 350

*
[Pause] /[Resume]
Press [Pause] to temporarily stop the current print job. Press [Resume] to restart the paused print job.
● For a secured or encrypted document, clicking [Resume] displays a screen to prompt you to enter the PIN.
Enter the correct PIN and click [OK].
*
Not displayed when <Interrupt Print> is set to <Off> in the setting menu of the operation panel (
Print(P. 369) ).
● The status of all print jobs is displayed regardless of the settings of the Department ID Management.
● The factory default settings prevent some operations, such as deleting a document to print or
interrupting a print job, from being performed in General User Mode. If you want to operate
documents in General User Mode, log on in Management Mode and enable [Allow General User Job
Operation].
● If you entered your user name when you logged on in General User Mode, your user name will only
be displayed on the documents that you printed.
● Click [Job No.] on the paused documents and secure documents to display detailed information. You
can check the user name and the page count of the printed document.
Checking History of Documents
The print history and e-mail reception history are displayed in list form.
Log on to the Remote UI (
[Job Log] (Print)
Four types of print history can be displayed.
[Print Job/Direct Print]
[Stored Job]
Using Remote UI
*
Enabling End Users to Operate Documents(P. 348)
Starting Remote UI(P. 333) )
Up to 400 documents printed from computers and USB memory devices are displayed
(up to 2,000 documents when the SD card is mounted).
The history of up to 2,000 printed documents stored in the machine is displayed (only
when the SD card is installed).
[Status Monitor/Cancel]
343
Interrupt
[Job Log]