Canon LBP352 User Manual page 497

The login name to be used for IEEE802.1X authentication is not specified.
● The login name to be used for IEEE802.1X authentication is not specified. Specify the login name.
IE The certificate has expired.
The certificate received from the authentication server has been found to have expired during
IEEE802.1X authentication.
● Check the certificate of the authentication server.
● Check the time settings in the machine and authentication server.
Date/Time Settings(P. 367)
IE The certificate is incorrect.
An error has occurred as a result of verification of the certificate received from the authentication server
by using the CA certificate during IEEE802.1X authentication.
● Check the certificate of the authentication server.
● Install the CA certificate in the machine.
Using CA-issued Key Pairs and Digital Certificates(P. 326)
IEEE802.1X error. Set the necessary auth. information.
The information specified for IEEE802.1X authentication is not sufficient.
● Check the IEEE802.1X settings, and specify the settings properly.
Configuring IEEE 802.1X Authentication(P. 309)
Image browse data error.
The TIFF data contains data that the machine cannot process while receiving.
● Set <TIFF Spooler> to <On>, and print the file again. If the file size exceeds 40 MB, install an SD card.
TIFF Spooler(P. 427)
Installing an SD Card(P. 583)
● Because the data cannot be printed, press
Image data error.
The TIFF or JPEG data contains data that is not available for the machine.
● Because the data cannot be printed, press
Insert toner cartridge.
The toner cartridge is not set or properly set.
● Properly set the toner cartridge.
How to Replace Toner Cartridges(P. 524)
Key management file is corrupt or deleted.
Files related to key management are damaged.
● Restart the machine, regenerate or reinstall the key and certificate, and then specify the TLS settings.
Turning ON/OFF the Power(P. 33)
Troubleshooting
( ) to cancel the print job.
( ) to cancel the print job.
490