Canon LBP352 User Manual page 397

Receive in Parallel
Specify whether to print the received jobs in the order of reception when multiple print jobs are sent from multiple
computers or other devices. When you sequentially send multiple print jobs to the machine, you can print them
without being interrupted by print jobs sent from other computers or the like. To do so, set this item to <Off>.
Off
On
(
or <On>
Wait Time at Startup
Specify a wait time for connecting to a network. Select the setting depending on the network environment.
Wait Time for Connecting to a Network(P. 219)
0 to 300 (sec.)
Remote UI Settings
Specify settings for using the Remote UI. You can use the Remote UI to specify settings for the machine from a Web
browser.
Remote UI
Enable or disable the Remote UI.
Off
On
RUI Access Sec. Set.
Select whether to use a PIN to access the Remote UI.
Off
On
Remote UI Access PIN
Specify so that entry of a PIN is required for access to the Remote UI when <RUI Access Sec. Set.> is set to <On>.
Set a PIN of up to 7 digits. All users use a common PIN.
*
TLS
Enable or disable TLS for Remote UI communications. To use TLS for encrypted communications, you need to
set key pairs by using the Remote UI (
Off
On
Setting Menu List
) <Network> Check the message
Perform a hard reset (
Disabling Remote UI(P. 289)
*
Using TLS for Encrypted Communications(P. 294) ), respectively.
Performing a Hard Reset(P. 451) )
Setting a Remote UI PIN(P. 263)
Setting a Remote UI PIN(P. 263)
390
<Receive in Parallel> <Off>
Setting a