Canon LBP352 User Manual page 416

● When you set this item to <On> and use the machine in an environment with high humidity, the print
density may become lighter or uneven.
Special Print Mode A
Streaks may appear on printouts depending on the paper type or the environmental conditions. In this case, setting
this item may solve the problem. The improvement effect is weakest with <Mode 1> and strongest with <Mode 4>.
Off
Mode 1
Mode 2
Mode 3
Mode 4
(
● This item cannot be set when <Barcode Adj. Mode> is set to one of <Mode 1> to <Mode 4>.
Mode(P. 411)
● If you select <Mode 3> or <Mode 4>, the print speed will be slower.
● As the improvement effect is increased, the print density becomes lighter. In addition, the edges may be
blurred or roughness may be slightly emphasized.
Special Density Mode
When you use the machine in an environment with high humidity, the print density may become lighter or uneven. In
this case, setting this item to <On> may solve the problem.
Off
On
(
● When you set this item to <On> and use the machine in an environment with low humidity, printed images
or text may be smudged.
Setting Menu List
) <User Maintenance>
) <User Maintenance>
<Special Print Mode A>
<Special Density Mode>
409
Select the mode
Barcode Adj.
<Off> or <On>