Canon LBP352 User Manual page 414

Offset Y (2-Sided)/Offset X (2-Sided)
You can adjust the vertical/horizontal print position for printing on the first page (front side) in 2-sided printing
mode. The print position on the second page (back side) follows the settings for the paper source available
when the printing is started.
-5.0 to 0.0 to +5.0 (mm)
Recovery Printing
Select whether to print again the page of which printing was interrupted by a paper jam or an error.
Off
On
(
Initialize Counter
Select whether to initialize the count of printed pages on the fixing unit.
Fixing Unit
Initialize the count of pages using the same fixing unit. You need to perform this operation each time you
replace the fixing unit.
(
Unit>
Check Paper Size
Select whether to check the size of paper that is fed from the paper source with the paper size set to <Free Size>. If you
select <On>, the message for confirming the paper size is displayed and the printing is stopped when the size of the
paper fed from the paper source does not match the print data.
Off
On
(
Setting Menu List
*
) <User Maintenance>
) <User Maintenance>
<Yes>
) <User Maintenance>
<Recovery Printing>
<Initialize Counter>
<Check Paper Size>
407
<Off> or <On>
<Fixing
<Off> or <On>