Part 1. Getting Started; Scale Operation Precaution Measures - ELZAB Eco Print Operator's Manual

ELZAB S.A.  +48 32 272 20 21

Part 1. Getting Started

1.0 Scale Operation Precaution Measures

Important! The scale must be powered from an outlet with a proper grounding. Do not use electric networks, outlets,
and power cords without proper grounding – it can cause scale damage and operator injury!
Important! Prevent moisture from getting inside the scale while operating it! It can cause scale damage and operator
injury!
Important! Always unplug the scale from the electric network before periodic and non-recurrent maintenance
operations like cleaning the platter/pan, the keyboard, or the thermal head of the printing mechanism.
Important! Do not use sharp metal objects to clean the thermal head of the printing mechanism! Use the cleaning pen
only! Apart from the cleaning pen, use spirit-based cleaning solutions! Before plugging the scale into the electric
network, make sure there is no cleaning solution left on the thermal head! Failure to comply with the above
requirements may cause thermal head damage!
Important! Scale is voided of warranty, if diagnosed for disregard for safety regulations and the above mentioned
requirements.
Important! Scale does not produce any gases while operating normally!
Important! Scale is equipped with a lithium battery that must be replaced by an authorized service personnel only. It
is prohibited to throw away used lithium battery – it has to be disposed of in a proper way. Check your regional lithium
battery disposal rules.
Important! Scale has a nonrecoverable electric fuse. Fuse must be replaced by an authorized service personnel only.
4
www.elzab.pl