ELZAB Eco Print Operator's Manual page 44

ELZAB S.A.  +48 32 272 20 21
Message
Zero not set!
Tare not set!
Can't set tare value!
Operation forbidden!
Invalid PLU number!
Can't access PLU!
Empty PLU XXXXX
Item not found!
Invalid PLU data!
Function failed!
40
Description
Impossible to set the weight to zero.
Tare weight or the total tare weight
value out of range (exceed Tare Max
Weight value indicated on the special
sticker under the display of the
scale).
Tare weight value has already been
entered manually or by weighing it
on the scale.
When entering tare weight with
numeric keys, zero tare weight value
was set.
Returned to an attempt to override
item unit price, when this function is
disabled.
Returned to an attempt to save a
new item unit price to PLU, when this
function is disabled.
Returned to an attempt to print a GT
label in Grand Totals Mode, when this
function is disabled.
The entered PLU number is out of
range in this scale.
Returned to an attempt to call up an
item with a quick access key.
Impossible to get item data when
selecting it, or the error is returned
to an attempt to save item unit price
to PLU.
Returned to an attempt to call up a
PLU containing no data.
The item with the entered number
was not found when calling it up by
its code.
Some data of the called up PLU is out
of range.
Error occurred while executing a
function assigned to the pressed
quick access key.
Troubleshooting
To set the weight to zero, the platter/pan
of the scale should be empty. If it is still
impossible to set the weight to zero with
the empty platter/pan, contact the system
administrator.
Use tare of appropriate weight, or stop
multiple tare-out operations.
It is necessary to discard the tare weight
value entered by measuring it on the scale
or manually with numeric keys, in order to
call an item with a preset tare weight
(refer to paragraph 2.3 Entering Tare
Weight).
Enter non-zero tare weight value with the
numeric keys.
Contact the system administrator.
Enter a correct PLU number. Check with
the system administrator the PLU number
of the wanted item.
Quick access key is programmed to call up
a PLU with an invalid number. Contact the
system administrator.
Contact the system administrator.
PLU with this number has not been
programmed in the database or has been
deleted. Contact the system administrator.
Contact the system administrator.
Contact the system administrator.
Contact the system administrator.
www.elzab.pl