Grand Totals Memory; Add To Grand Totals Memory - ELZAB Eco Print Operator's Manual

ELZAB Eco Print
Unknown Tare Weight on Scale).
To use the automatic printing function, always select an item or set unit price first, and then place the product
on the weigh platter/pan. It is redundant to use the key
has been measured and product cost has been calculated, a label is printed, provided that the measured net weight
exceeds the autoprinting threshold value. Other conditions that can block automatic label printing are described in
paragraph 2.5.1 Standard Labels.
It is possible to use automatic printing in the reversed order – place a product on the platter/pan first and then
select an item or set unit price – in case Print Label if PLU Chosen function is enabled by the system administrator.
To use the automatic printing function recurrently, remove the product from the platter/pan together with the
tare (if tare is used).
Important! It is not recommended to use automatic label printing function when products are placed on the platter/pan
or into the tare by pieces or filled up by portions, since label printing is triggered immediately after the threshold weight
value has been exceeded. On the other hand, autoprinting threshold can be intensionally used for packing such
products with target weight.
Important! In autoprinting, if tare weight can be greater than the weight of a product, it is recommended to enter tare
weight value first and only then enable the Automatic Label Printing function.
Important! If Prepacking Mode is enabled, Automatic Label Printing function is operating differently from the described
above (refer to paragraph 2.8 Prepacking Mode).

2.7 Grand Totals Memory

The grand totals memory (GT memory) allows to calculate the total sales amount of miscellaneous items (if
Prepacking Mode is off; refer to paragraph 2.8 Prepacking Mode for details) or the total weight/quantity of one item
(if Prepacking Mode is on). The turned on display tag M shows that the grand totals memory is not empty. The
accumulation in the grand totals memory continues until the grand totals sales amount reaches its maximum value of
"9999.99" (or "999999", if the decimal separator is not used), the quantity of grand totals transactions – "255", and the
grand totals weight – "65.535" kg (in Prepacking Mode).

2.7.1 Add to Grand Totals Memory

To add transaction cost (as well as weight/quantity in Prepacking Mode) of an item to the grand totals memory,
do the following:

Press the key

After the first transaction has been added to the GT memory, the display tag M turns on showing that
the GT memory is not empty;

In the second line of the display, the scale will indicate a message "Grand totals:" along with the sales
amount (as well as weight/quantity in Prepacking Mode) accumulated in the GT memory inclusive of the
latest transaction;

Pressing the key
receptor) will interrupt the indication of the contents of the GT memory.
Important! The system administrator can program the scale to print a standard label and simultaneously add a
;
or changing the weight on the platter/pan (e.g. by taking the item off the load
for automatic label printing. As soon as the net weight
Operator's Guide
23