Table of Contents
Advertisement
ELZAB S.A. +48 32 272 20 21
3. Label paper must be properly loaded in the printing mechanism; label format should match the one
selected by the system administrator (refer to paragraph 1.7 Loading Paper in Printing Mechanism). If
printing is done on labels smaller than the label size configured in the scale settings, the scale will display
a warning message "Incomplete printing!". The description of other printing errors and their
troubleshooting are given in paragraph 3.3 Printing Errors.
4. The system administrator can enable the label stripping sensor. If the last printed label has not been
removed, the printing of the next label does not commence, the scale emits an error beep and displays a
message "Remove the label!".
5. Label printing function can be disabled by the system administrator. If label printing is disabled, the scale
emits an error beep and displays a message "Settings error 115".
If automatic label printing is enabled (the display tag AUTO is on), a standard label is printed automatically
upon placing a product on the weigh platter/pan. The system administrator can additionally enable Print Label if PLU
Chosen function. For a detailed information on the automatic label printing function refer to paragraph 2.6. Automatic
Label Printing.
NOTE 1. Standard label of a non-weight item differs from a standard label of a weight item only in having quantity in
pieces instead of weight in kilograms.
NOTE 2. If enabled by the system administrator, pressing the key
a sales transaction to the grand totals (GT) memory.
2.5.2 Label Copies for Non-Weight Items
To print several label copies for a non-weight item (up to 99), follow the procedure below (provided that a non-
weight item has been selected or the scale is in Non-Weight Item Mode):
Press the key
one of the keys
To print only one copy of the last non-weight item label, instead of the actions described above simply
double-press the key
The system administrator can enable label stripping sensor. In this case, the scale does not print the next
label until the last printed label has been removed. Otherwise, the scale will print labels without checking
if they are being removed or not. This option can be used only if the take-up unit is disabled, the liner is
not wound on it, and the label paper is fed out of the printer;
The scale emits short periodic beeps while waiting for the printed label to be removed.
2.6. Automatic Label Printing
Automatic label printing function facilitates the printing of standard labels (refer to paragraph 2.5.1 Standard
Labels). The turned on display tag AUTO demonstrates that the automatic label printing function is enabled.
Automatic label printing is related to the autoprinting threshold parameter which value can be adjusted (refer
to paragraph 2.9.5 Autoprinting Threshold). Autoprinting threshold of the automatic printing is a weight value set for
specific labeling tasks by an operator or the system administrator (exact values depend on the type of the product
being weighed and its tare parameters). A label is printed, if the measured net weight of an item placed on the
platter/pan exceeds the programmed autoprinting threshold weight value. A properly set threshold value allows
operators to use tare weight value measured on the scale for automatic printing (refer to paragraph 2.3.1 Measuring
22
. Then enter the required number of copies with the numeric keys
or
;
without entering the number of copies;
can print a standard label and simultaneously add
www.elzab.pl
..
and press
Advertisement
Table of Contents
Troubleshooting
