Printing Errors - ELZAB Eco Print Operator's Manual

ELZAB Eco Print
Message
Autoprinting disabled!
Invalid unit price!
Invalid item code!
Exchange rate not set!
PLU not selected!
Can't add to GT Memory
Can't void transaction
Invalid bar code!
Invalid password!
Error XXX

3.3 Printing Errors

Table 3
Description
Returned to an attempt to enter
Autoprinting Threshold Program
Mode with a quick access key, when
automatic label printing is disabled
by the system administrator.
Returned to an attempt to call up a
preset unit price value with a quick
access key.
The entered item code value is out of
range.
Returned to an attempt to call up an
item by its code with a quick access
key.
Returned to an attempt to enter
Secondary Currency Cost Equivalent
Mode with the currency exchange
rate not set.
Returned to an attempt to save a
new unit price to PLU/in Arbitrary Bar
Code Input Mode/to print a label/to
add a transaction to the GT memory,
if no PLU is selected and it is not
allowed to set manually unit price.
Impossible to add another
transaction to the GT memory.
Returned to an attempt to void more
than one transaction from the GT
memory, or the GT memory is empty.
Returned to an attempt to enter an
invalid bar code in Arbitrary Bar Code
Input Mode.
This error is returned to an attempt
to enter the System Menu.
The display shows the number of the
error.
Troubleshooting
Contact the system administrator.
The quick access key is programmed with
an invalid unit price value. Contact the
system administrator.
Enter a valid item code value.
The quick access key is programmed with
an invalid item code value. Contact the
system administrator.
To enter Secondary Currency Cost
Equivalent Mode, set the currency
exchange rate (refer to paragraph 2.9.6
Currency Exchange Rate).
To perform these actions, select an item
first (refer to paragraphs 2.9.2 Saving Unit
Price to Scale PLU Memory/2.9.9 Arbitrary
Bar Code/2.5 Printing Labels/2.7 Grand
Totals Memory).
The GT memory (GT sales amount, GT
weight, or GT transactions) is overflowed,
or the operator attempts to add sales
amount or weight equal to "0".
The scale allows voiding only the last
transaction added to the GT memory. If it
is necessary to void several transactions,
clear the GT memory and add the
transactions once again.
Enter a valid bar code (refer to paragraph
2.9.9 Arbitrary Bar Code).
The System Menu is designed for the
system administrator. If an operator has
mistakenly pressed the key
entered the prompt to input password to
access the System Menu, press the key
to return to the normal operating
mode.
Contact the system administrator.
Operator's Guide
and
41