Part 2. Scale Operation; Selecting Items - ELZAB Eco Print Operator's Manual

ELZAB Eco Print

Part 2. Scale Operation

The principal function of the scale is product cost calculation by its measured weight and a set unit price and
subsequent printing a label. The general operating procedure is described below:

Make sure that the platter/pan is empty and the weight value on the display is at zero. The display tag
ZERO should be on (refer to paragraph 1.5 Display);

Enter price of a product either manually (refer to paragraph 2.2 Unit Price), or select an item (refer to
paragraph 2.1 Selecting Items);

If it is necessary to use tare, set tare weight in one of the ways described below (refer to paragraph 2.3
Entering Tare Weight);

If it is necessary to calculate the cost of a non-weight item with its unit price entered manually (the
display tag PLU is off), turn on Non-Weight Item Mode (refer to paragraph 2.4 Non-Weight Items);

Place a weight item on the platter/pan, or enter quantity of a non-weight item manually;

Get the product cost reading; print a label, if necessary (refer to paragraph 2.5 Printing Labels). Take the
product off the platter/pan;

Proceed to processing the next product.
NOTE. It is possible to measure weight of a product before selecting it/entering unit price, if the automatic printing is
disabled (the display tag AUTO is off). When using automatic printing, check with the system administrator, if it is
possible to select an item after weighing it. Refer to paragraph 2.6. Automatic Label Printing for details.

2.1 Selecting Items

If an item is programmed in the memory of the scale, there are several way to call it up. The first way is to select
an item by its PLU number or by its code number. Contact the system administrator to know, which option is enabled
in the scale. The second way is to select an item by pressing a corresponding quick access key (keys should be properly
programmed in advance). Contact the system administrator to find out how quick access keys are programmed in the
scale. The third way to select a product is to enter Item Search Mode. It is also possible to call up an item with a bar
code scanner connected to the scale. All these methods are described below. Regardless of the method of selecting an
item, once an item is selected, the display tag PLU turns on, and the item unit price and the first line of its name are
displayed (see Illustration 13
If item information contains preset item tare weight, the line with the name of the product will begin with the
item tare weight value and a prefix "PT:".
To display the second line of an item name (see
below):
Illustration 14), press the key
Operator's Guide
Illustration 13
:
15