ELZAB Eco Print Operator's Manual page 46

ELZAB S.A.  +48 32 272 20 21
Message
PLU not selected!
Weight not stable!
Error XXX
Settings error XXX
No paper!
No label found!
Printer head open!
Remove the label!
Printer overheated!
Empty label format!
RTC error!
Date-time error!
Messages error!
Bar code error!
42
Description
This error may occur in an attempt to
print a label.
This error may occur in an attempt to
add a transaction to the GT memory.
May occur in an attempt to print a
label, when the weight is less than
Min.
The display shows the number of the
error.
The display shows the number of the
error.
No paper in the printing mechanism.
The printer failed to identify a label
on the paper.
The head of the printer is not closed.
The last printed label has not been
removed, or paper is not wound
around the take-up unit.
The thermal head overheated while
printing.
The label format selected by the
system administrator, has zero
length.
Internal real-time clock failure.
System error.
System error.
Error when generating a bar code
(fields lengths conflict of the selected
by the system administrator bar code
structure and the data used for
printing)
Troubleshooting
This operation requires an item to be
selected first. Manually entered unit price
is disabled by the system administrator.
To print a label, weight has to be stable
and be within the range between Min and
Max. Min and Max values are indicated on
the special sticker under the display.
Contact the system administrator.
Contact the system administrator.
Load a new paper roll, make sure the
paper is loaded properly (refer to
paragraph 1.7 Loading Paper in Printing
Mechanism).
Press the key several times. Paper
should be fed by one label at a time. If the
scale returns the same error while feeding
label paper, check whether paper is
properly loaded and the printer slot is
clean (refer to paragraph 1.7 Loading
Paper in Printing Mechanism).
Bring together the closing levers of the
thermal head until you hear a click (refer
to paragraph 1.7 Loading Paper in Printing
Mechanism). Press the key
printer to identify the beginning of a label.
Remove the printed label. If it is required
to print labels without removing them
from the line (paper is not wound around
the take-up unit), contact the system
administrator.
If the thermal head has got overheated
because of continuous operation, let it
cool for several minutes. If it did not help,
contact the system administrator.
Contact the system administrator.
Contact the system administrator. Label
printing and sales recording are disabled.
Contact the system administrator.
Contact the system administrator.
Contact the system administrator.
www.elzab.pl
for the