Change Calculation; Prepacking Mode - ELZAB Eco Print Operator's Manual

ELZAB Eco Print

2.7.4 Change Calculation

To calculate change amount due to a customer with several transactions added to the GT memory (refer to
paragraph 2.7.1 Add to Grand Totals Memory), press the key
display the grand totals sales amount and number of transactions. The following options are available for the scale
operator at this point:

To continue adding transactions to the GT memory, press the key
will remain intact, and the scale will return to the normal operating mode;

To calculate the change, enter the amount received from the customer with the numeric keys
and press the key
If the amount received from the client was entered correctly and it is not necessary to continue adding
transactions to the GT memory, press the key
will turn off, and the scale will return to the normal operating mode. To edit the entered amount received from the
client, press the key

2.8 Prepacking Mode

Prepacking Mode is designed for processing one item and printing standard and grand totals labels. Prepacking
Mode can be enabled either by the system administrator or with a properly programmed quick access key (refer to
paragraph 1.3 Quick Access Keypad). When the scale is in Prepacking Mode, the display indicator PACKING is on (refer
to paragraph 1.5 Display).
Prepacking Mode is different from the normal mode in the way how the grand totals memory and the
automatic label printing functions operate in it. These differences provide for a faster and easier packing of an item as
well as for printing not only standard labels, but also grand totals labels with the total net weight of a one-pack. It is
not recommended to use Prepacking Mode for any other tasks.
Differences of the operation of the grand totals memory in Prepacking Mode:

It is not allowed to discard item selection, to select another item, or to change item unit price – it can be
done only after the accumulation to the GT memory has been finished and its contents has been cleared;

It is not allowed to use quick access keys since they can be programmed to call up items or unit price
values, or to modify scale parameters that influence scale operation – it can done only after the
accumulation to the GT memory has been finished and its contents has been cleared;

When adding transactions to the grand totals memory, item selection, even though enabled by the
system administrator, cannot be automatically discarded – it will be done only after the accumulation to
the GT memory has been finished and its contents has been cleared;

The grand totals memory accumulates not only transaction cost amounts, but also the net
weight/quantity of the item;

A transaction will be added to the grand totals memory, even if the calculated cost is "0" (item unit price
can be undefined);

The grand totals label will contain the accumulated value of the grand totals net weight.
Differences of the operation of the automatic label printing in Prepacking Mode:

Every automatically printed label adds the measured net weight and the calculated cost to the GT
. The scale will display the calculated change amount.
and enter the received amount again.
. The scale will enter Change Calculation Mode and
. The contents of the GT memory will be cleared, the display tag M
Operator's Guide
. The contents of the GT memory
..
25