Maintenance; Daily Maintenance; Service Shop Maintenance; Disposal Of The Machine - Kemppi FastMig MXF65 Operating Manual

7.

MaintenanCe

When considering and planning routine maintenance, please consider the the frequency of
machine use and the working environment.
Correct operation of the machine and regular maintenance will help you avoid unnecessary
downtime and equipment failure.
Disconnect the machine from the mains before handling the electrical cables.
NOTE!
7.1

daily MaintenanCe

• Check the overall condition of the welding gun. Remove welding spatter from the contact
tip and clean the gas nozzle. Replace worn or damaged parts. Only use original Kemppi
spare parts.
• Check the condition and connection of the welding circuit components: welding gun,
earth return cable and clamp, sockets and connectors.
• Check the condition of the feed rolls, needle bearings and shafts. Clean and lubricate
bearings and shafts with a small quantity of light machine oil if necessary. Assemble,
adjust and test function.
7.2

serviCe shOp MaintenanCe

Kemppi Service Workshops complete maintenance according to their Kemppi service
agreement. Recommended termed service and cleaning is listed in the FastMig Pulse Power
source manual.
Regular preventative maintenance by trained technicians will increase equipment life and
ensure reliable operation.
8.

dispOsal OF the MaChine

Do not dispose of electrical equipment with normal waste!
In observance of European Directive 2002/96/EC on waste electrical and electronic
equipment, and its implementation in accordance with national law, electrical equipment
EN
that has reached the end of its life must be collected separately and taken to an appropriate
environmentally responsible recycling facility.
I
The owner of the equipment is obliged to deliver a decommissioned unit to a regional
collection centre, per the instructions of local authorities or a Kemppi representative. By
applying this European Directive you will improve the environment and human health.
9.

Ordering nuMBers

PF 65 panel
FastMig Pulse 350, 3 ~ 400V
FastMig Pulse 450, 3 ~ 400V
MXF65 wire feeder
MXF67 wire feeder
MXF65 wire feeder
MXF67 wire feeder
SF 53 panel, 300 mm
SF 54 panel, 300 mm
FastMig KMS 300, 3 ~ 400V
FastMig KMS 400, 3 ~ 400V
FastMig KMS 500, 3 ~ 400V
24
6155100
6150400
6150500
Work pack profile 6152100EL
Work pack profile 6152200EL
Project pack custom 6152100
Project pack custom 6152200
6085300
6085400
6053000
6054000
6055000