Table of Contents
Advertisement
Mount the welding gun to the welding carriage and connect the data cable connector to the
socket on the carriage.
Adjust the position of the gun in the carriage so that it points to the right spot and is in the
right angle and distance from the groove.
For more information, see welding carriage documentation.
3.
use and maintenanCe
The amount of use and working environment should be taken into consideration when
planning the maintenance of MIG guns. Correct use and preventive maintenance will help
ensure trouble-free operation and excellent gun life.
Due to high temperatures and wear, the welding end of the MIG gun requires the most
frequent maintenance. The condition of other parts, including the gun cable, should also be
checked for wear or damage.
When fitting new liners, lay the gun straight on a flat surface.
The gun is equipped at the factory with a spiral liner for welding normal steel wire. Before
connecting the gun to the welding machine, make sure that the liner type meets the
recommendations for the welding filler wire to be used.
© Kemppi Oy / 1131
EN
7
Advertisement
Table of Contents
