Maintenance; Daily Maintenance; Disposal - Kemppi HiArc T 180 Manual

6.

MAINTENANCE

All electromechanical devices require routine service maintenance
depending on usage. This type of routine maintenance will prevent hazards
and malfunctions.
We recommend that you schedule a service inspection of your welding
machine every six months. An authorised Kemppi service agent will inspect
and clean your machine, ensuring that all power connections are tight and
secure. Power connections can become loose and oxidised with frequent
and high changes in temperature.
NOTE!
handling electric cables.
EN
6.1

Daily maintenance

6.2

Disposal

Do not dispose of electrical equipment with normal waste!
In observance of European Directive 2002/96/EC on waste electrical
and electronic equipment, and its implementation in accordance with
national law, electrical equipment that has reached the end of its life must
be collected separately and taken to an appropriate environmentally
responsible recycling facility.
The owner of the equipment is obliged to deliver a decommissioned unit
to a regional collection centre, per the instructions of local authorities
or a Kemppi representative. By applying this European Directive you will
improve the environment and human health.
16 16
Hiarc T 180
Disconnect the machine from the mains power supply before
• Check the welding torch electrode. Sharpen the electrode or replace a
damaged one.
• Check the tightness of the earth return cable connections.
• Check the condition of mains and welding cables and replace
damaged cables.