Pf65 Panel Overview - Kemppi FastMig MXF65 Operating Manual

5.12

pF65 panel OvervieW

8.
1. Main switch (long press)
2. a) Wire feed speed/welding current display
b) Display of selected adjustable parameter
3. a) Activation of MIG welding dynamics / Arc Force adjustment
EN
b) Selection of Wire Feeder (= paralleled wire feeders)
4. Gas purge
I
5. Wire inch
6. a) Display of welding voltage /plate thickness /timer settings
b) Display of selected adjustable parameter
7. Selection of MIG gun trigger function: 2T/4T/MATCHLOG long press *)
8. Display of welding process: MIG, 1-MIG, PULSE, DOUBLE PULSE, WISE *)
9. a) Selection of additional MIG functions
b) Activation of MMA welding process (long press*)
10. a) Adjustment of wire feed speed
b) Adjustment of welding power (Synergic 1-MIG and PULSE)
c) Adjustment of electrode welding (MMA) current *)
d) Adjustment of additional parameters when selected (ie Wire inch, Gas Test)
11. Memory channels 0-9, programming through P65 panel on the power source, panel lock
(long press on +)
12. a) Adjustment of welding voltage
b) Adjustment of length of welding arc (Synergic 1-MIG and PULSE)
c) Adjustment of additional parameters when selected (ie MIG Dynamics)
13. Panel control/remote control unit selection, channel remote control (long press)
*) Not included on standard delivery, see chapter 6: Ordering numbers
automatic Weld data display:
Last recorded welding values are displayed post welding. See power source panel P65.Select
MENU and then Weld Data.
20
1. 2. 3.
11. 10.
4. 5. 6.
7. 9. 12. 13.