Otto Bock DISCOVERY TMAX Instructions For Use Manual page 21

27
Mounting the seating system
1) Stand next to the seating unit and hold it by the backrest with one hand.
2) Place the retaining claw on the adapter tube under the seating unit at the back (see Fig. 28).
3) Press the seat down at the front until it sits on the front adapter tube (see Fig. 29).
4) Pull the release handle under the seating unit up (see Fig. 26).
5) Press the seating unit down until the lock audibly engages (see Fig. 30).
6) Close the seat lock underneath the seating unit. Do this by turning the locking pin 90° until it engages (see
Fig. 31).
Visually check that it has locked correctly.
7) Make sure the seating unit is secure by giving it a few short tugs.
→ The seat is installed.
29
31
Seating systems with trapezoid adapter
Ottobock offers a trapezoid adapter for individual third party seating systems.
The lower section (see Fig. 32) has been mounted to the seat plate. The upper section (see Fig. 34, item 1) is loc­
ated on the underside of the seating system (see Fig. 34, item 3).
discovery tmax
28
30
Usage
Ottobock | 21