1.11 Memory Installation Procedures
To install DIMMs, first make sure the two handles of the DIMM
socket are in the "open" position. i.e. The handles remain outward.
Slowly slide the DIMM module along the plastic guides on both ends
of the socket. Then press the DIMM module right down into the
socket, until you hear a click. This is when the two handles have
automatically locked the memory module into the correct position of
the DIMM socket. (See Fig. 1-3.) To take away the memory module,
just push both handles outward, and the memory module will be
ejected by the mechanism in the socket.
Figure 1-3: DIMM installation
18
PCA-6175 User's Manual