Albatron kx600s Instruction Manual page 45

KX600S PRO/ KX600S
VGA
When set to "On", any event occurring at a VGA Port will awaken a system which had been
previously powered down. Options: OFF (default)、On.
LPT & COM
When this option is set to On, any event occurring at a COM(serial)/LPT (printer) port will awaken a
system which has been suspended.
Options: LPT/COM (default)、COM、LPT、NONE
HDD & FDD
When set to "On", any event occurring on a hard drive activity or a floppy drive activity will awaken
the system which had been previously suspended. Options: ON、OFF (default)
PCI Master
When set to "On", you need a LAN add-on card which supports the power on function. It should also
support the wake-up on LAN jumper. Options: OFF (default)、ON
PCI PME Wake Up
When you select "Enabled", a PME signal from any PCI card will awaken the system from suspend
mode. Options: Disabled、Enabled (default)
Ring Wake Up
This option allows you to awaken the system upon receiving an incoming call to a modem device.
Option: Disabled (default)、Enabled
RTC Wake Up
When "Enabled", you can set the date and time at which the RTC (real-time clock) alarm awakens
the system from Suspend mode. Options: Enabled、Disabled (default)
Date (of Month)
You can choose which month the system will boot up. This field is only configurable when "RTC
Wake Up" is set to "Enabled"
Resume Time (hh: mm: ss)
You can choose the hour, minute and second the system will boot up. This field is only configurable
when "RTC Wake Up" is set to "Enabled"
40
This Manual: http://www.manuallib.com/file/2538033