Cpu Clock Ratio; Spread Spectrum - Albatron kx600s Instruction Manual

KX600S PRO/ KX600S
PCI / VGA Palette Snoop
Some graphic controllers that are not VGA compatible take the output from a VGA controller and
map it to their display as a way to provide boot information and VGA compatibility.
Options: Disabled (default)、Enabled
PCI Latency Timer (CLK)
This item allows you to set up the PCI Latency Time (0-255). If you select the "32" it will optimize
PCI speeds. Options: 0-255、32 (default)
PCI 1-5 IRQ Assignmen
This item allows you to select an IRQ address for your PCI slot 1-5.
Options: Auto (default)、3、4、5、7、9、10、11、12、14、15
Frequency/Voltage Control
CPU Speed Detected
This item displays the CPU speed information detected by the system.

CPU Clock Ratio

Before you adjust the option, please make sure that your CPU ratio can be adjusted. This item
displays the CPU ratio information detected by the system.
Options: 5、5.5、6、6.5、7、7.5、8、8.5、9、9.5、10、10.5、11、11.5、12、12.5、13、13.5、
14、15、16、16.5、17、18、19、20、21、22、23、24
* It is possible that some systems with CPUs will have limitation about the options range is 5 to 12.5.
* It is possible that some systems with Duron CPUs will shut down automatically after adjusting the
CPU clock ratio. After 5 seconds, the systems will boot up by the value adjusted if the systems
accepte the value.

Spread Spectrum

The Spread Spectrum function can reduce the EMI (Electromagnetic Interference) generated. Options:
+/-0.25%、-0.5%、+/-0.5% (default)、+/-0.75、Disabled
CPU Host Frequency (MHz)
This item displays the CPU Host Clock. You can set it from 100 to 248. The default depends on your
CPU frequency. If you over-clock the CPU clock ratio and the DDR:CPU ratio items can be adjusted.
Default: By CPU speed
31
This Manual: http://www.manuallib.com/file/2538033