Albatron kx600s Instruction Manual page 24

KX600S PRO/ KX600S
S/PDIF Connector: SPDIF
S/PDIF (Sony/Philips Digital Interface) is an audio transfer file format, which provides high quality
audio using optical fiber and digital signals. This mainboard is capable of delivering audio output and
receiving audio input through the SPDIF header. One way you would use this header is by using an
SPDIF & FRONT AUDIO bracket (optional) attached to your computer. This bracket will have two
wires that you can attach to the SPDIF header and the FRONT_AUDIO header. This bracket has
RCA connectors similar to that used with most consumer audio products. Using the RCA connectors,
the data can then be output to and input from an S/PDIF device. This bracket will also have the
TOS-LINK connectors. You can also use the TOS-LINK connectors to output audio to an S/PDIF
device. The devices that are receiving and sending information from this header must be S/PDIF
compliant for optimal effect. Note that the SPDIF bracket is optional in the packaging that comes
with this mainboard.
SPDIF & Front Audio Bracket (optional)
You can connect the bracket to the SPDIF and FRONT AUDIO Headers.
SPDIF Wire
SPDIF OUT
(RCA Conn.)
SPDIF OUT
(Tos-link Conn.)
SPDIF IN
(RCA Conn.)
Earphone
Microphone
FRONT AUDIO Wire
19
This Manual: http://www.manuallib.com/file/2538033