Scene Mode - Source Audio Soleman User Manual

Expression Input
The expression input connects to an
The expression signal is on the tip, power (3.3 V) is on the ring, and the sleeve is ground. The
Soleman has an Expression Calibration
that have a wide range of different resistances.

Scene Mode

In Scene Mode, the Soleman steps through programs in sequential order and outputs Program
Change messages, Note On messages, or Macros. Program Change messages are enabled by default.
This is the simplest mode of operation and matches the functionality of most simple MIDI
footswitches.
This mode works very well with Source Audio's Neuro Hub, as a way to recall Scenes. Scenes are
basically a way of storing preset information for multiple effects pedals in the same system, with the
benefit of being able to save and recall those presets all at the same time with a single program
change message.
There are a total of 128 Scenes available in the Soleman, and each has a corresponding MIDI message
that is sent from the MIDI outputs (hardware and USB) when the Scene is activated. By default, each
Scene will output a MIDI Program Change message. The number of the Program Change message
corresponds to the Scene number. For example, when Scene 5 is activated, a Program Change
message with a program number of 5 will be sent from the MIDI outputs.
It is also possible to configure the Soleman to send other MIDI message types (such as Note On
messages or macros) in Scene Mode. This can be done using the
In Scene mode, the LCD displays the name of the Scene in the upper left and the corresponding
program number in the lower right.
Scene Name
H i
Basic Scene Navigation
To change scenes, use the Previous and Next footswitches. By pressing the Next footswitch, the
Scene number will increase by 1. By pressing the Previous footswitch, the Scene number will
decrease by 1. Each time a new Scene is activated, the corresponding MIDI message will be output
from the Soleman. The Scenes range from 0 to 127. If the Next footswitch is pressed when Scene 127
SA165
external passive expression
function which makes it compatible with expression pedals
g h G a i
Soleman User's Guide
pedal. The plug is TRS and "tip hot."
USB Editor
n L e a d
Program Number
Software.
3 0
8