Connecting Programming Devices; Connecting Expansion Racks - Omron SYSMAC CS1 Operation Manual

External Connections

2-5-1 Connecting Programming Devices

2-5-2 Connecting Expansion Racks

1. SYSMAC CS1 Board +
Expansion I/O Board +
CS-series Expansion Racks
Computer
Expansion I/O Board
CS-series
Power supply
I/O Con-
necting
Cable
CS-series
Expansion
Rack
CS-series
I/O Con-
Power supply
necting
Cable
CS-series
Expansion
Rack
CS-series
I/O Con-
necting
Power supply
Cable
CS-series
Expansion
Rack
Cable length: 12 m max.
Connecting to the
Expansion I/O Board
42
9. Be sure to connect the signal lines, power lines, and shield lines correctly
and do not get them mixed up.
10. Be sure that the signal lines, power lines, and shield line do not become dis-
connected during communications.
11. Double-check all wiring before turning the power supplies back ON.
Use the same Connecting Cables and Programming Consoles that are used
with CS-series PLCs.
Connecting Cable model
number
CS1W-CN226
CS1W-CN626
The SYSMAC CS1 Board can be connected Expansion Racks through an Ex-
pansion I/O Board, as shown in the following examples.
2. SYSMAC CS1 Board +
Expansion I/O Board +
C200H Expansion I/O Racks
Computer
CS-series:
C200H
I/O Connecting
Cable
C200H I/O
Connecting
Cable
Up to 7
Racks
max.
C200H I/O
Connecting
Cable
Cable length: 12 m max.
Press the latches on the connector and insert it until it locks securely. The con-
nected devices will not operate properly with an incomplete connection. To re-
move the connector, press the latches and pull the connector straight out of the
Board.
Note 1. Turn OFF the computer, all peripheral devices, and all Expansion Racks be-
fore connecting the I/O Connecting Cable.
Cable length
2.0 m
6.0 m
Expansion I/O Board
CS-series
Power supply
I/O Connecting
Cable
C200H
Expansion
I/O Rack
CS-series:
C200H
Connecting
Power supply
Cable
Up to 3
C200H
Racks
Expansion
max.
I/O Rack
C200H I/O
Connecting
Cable
Power supply
C200H
C200H I/O
Expansion
Connecting
I/O Rack
Cable
Section
Computer connection
9-pin D-SUB
9-pin D-SUB
3. SYSMAC CS1 Board +
Expansion I/O Board +
CS-series and C200H Expansion
Racks
Computer
Expansion I/O Board
Power supply
CS-series
Expansion
Rack
Power supply
C200H
Expansion
Rack
Power supply
C200H
Expansion
Rack
Cable length: 12 m max.
2-5
Up to 7
Racks
max.
(Up to 3
C200H
Racks
max.)