List Of Available Models; Main Board (Cs1Pc-Pci01-Drm) - Omron SYSMAC CS1 Operation Manual

List of Available Models

Programming as a
CS-series CPU Unit
Using a Programming
Device
DeviceNet Configurator
Connectable to
Peripheral Port
Up to Seven CS-series
Expansion Racks or
Three C200H-series
Expansion I/O Racks
Basic I/O Units, Special
I/O Units, and CPU Bus
Units Connectible
Memory Card
Connectible
1-2

List of Available Models

1-2-1 Main Board (CS1PC-PCI01-DRM)

Board Model
CS1PC-PCI01-DRM CPU Unit Module:
CS1G-CPU45-EV1
DeviceNet Unit Module:
CS1W-DRM21-V1
CS1PC-PCI01H-DRM CPU Unit Module:
CS1G-CPU45H with unit
version 3.0
DeviceNet Unit Module:
CS1W-DRM21-V1
When a Programming Device (CX-Programmer or Programming Console) is
connected to the CS1 Board's peripheral port, the SYSMAC CS1 Board can be
used for programming just like a CS-series CPU Unit.
By connecting a DeviceNet Configurator (Ver. 2.0) to the SYSMAC CS1 Board's
peripheral port, it is possible to make the same settings as with a DeviceNet Unit.
Although the SYSMAC CS1 Board has no I/O other than DeviceNet, connecting
a CS1PC-EIC01 Expansion I/O Board allows up to seven CS-series Expansion
Racks (or up to three C200H-series Expansion I/O Racks) to be connected.
Mounting a Basic I/O Unit allows for I/O processing. It is not possible, however,
to use CS-series Long-distance Racks or CJ-series Expansion I/O Racks.
Basic I/O Units, Special I/O Units, and CPU Bus Units used by the CS Series can
be mounted on CS-series or C200H-series Expansion Racks, just like CS-series
CPU Units. (There are limitations depending on the type of Unit and Rack. For
example, Units such as Interrupt Input Units are incompatible because they
must be mounted to the CPU Rack.)
A Memory Card can be mounted, just as with the CS1G-CPU45-EV1 and CS1G-
CPU45H with unit version 3.0. Mounting and removal from the personal comput-
er's rear panel is not possible, however, so mount the Memory Card before the
SYSMAC CS1 Board is installed in the personal computer. The functions related
to the Memory Card are the same as for the CS1G-CPU45-EV1 and CS1G-
CPU45H with unit version 3.0.
Note 1. With the SYSMAC CS1 Board, it is not possible to use Interrupt Input Units
and Loop Control Units, which must be mounted to a CS-series CPU Back-
plane. It is also not possible to use Inner Boards.
2. The SYSMAC CS1 Board's DeviceNet master functions are the same as the
functions of a CS1W-DRM21-V1 DeviceNet Unit mounted in a CS-series
CPU Rack.
The following table provides a list of SYSMAC CS1 Boards that are currently
available.
The SYSMAC CS1 Board is composed of a CPU Unit Module and a DeviceNet
Unit Module. These Modules are equivalent in functionality to the CS1G-
CPU45-EV1 and CS1G-CPU45H CPU Unit with unit version 3.0 and the CS1W-
DRM21-V1 DeviceNet Unit.
Suitable PLC Peripheral
Yes
Yes
Note 1. The DeviceNet communications function is the same as for a CS1W-
DRM21-V1 CS-series DeviceNet Unit.
2. The SYSMAC CS1 Board occupies one PCI slot.
Max. No. of
port Expansion Racks
7
7
Section
Program DeviceNet
capacity communications
60 Ksteps Yes
60 Ksteps Yes
1-2
3