Conformance to EC Directives
1, 2, 3...
xxii
1. When using a CS-series Unit, it must be installed within a control panel.
2. You must use reinforced insulation or double insulation for the DC power
supplies used for the communications power supply and I/O power sup-
plies.
3. SYSMAC CS1 Boards also conform to the Common Emission Standard
(EN61000-6-4). Radiated emission characteristics (10-m regulations) may
vary depending on the configuration of the control panel used, other devices
connected to the control panel, wiring, and other conditions. You must there-
fore confirm that the overall machine or equipment complies with EC Direc-
tives.
6